Site Overlay


If possible, disconnect all power cables from the existing system before you add a device. Refer to the tables next page. Optional Documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. Lack of sufficient air flow within the system may damage the motherboard components. These documents are not part of the standard package. After connecting one end to the motherboard, connect the other end to the floppy drive. Under Linux, use the Hyper-Threading compliler to compile the code.

Uploader: Shakami
Date Added: 11 June 2010
File Size: 8.96 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 28525
Price: Free* [*Free Regsitration Required]

Unplug the power cord from the wall socket before touching any component. It includes brief descriptions of the motherboard components, and illustrations of the layout, jumper settings, and connectors.

The module has two USB 2. This prevents incorrect orientation when you connect the cables.

ASUS P4PE2-X Motherboard Ac 97 soundmax audio driver – Questions (with Pictures) – Fixya

The System Panel connector is color-coded for easy and foolproof p4pee2-x. DO NOT place jumper caps on the fan connectors! Expansion slots 1 x AGP 4X 1. Under Linux, use the Hyper-Threading compliler to compile the code. Italics Used to emphasize a word or a phrase. CPU Parameter Recall feature.


After connecting one end to the motherboard, connect the other end to the floppy drive. Refer to the tables next page. Doing so may damage the motherboard. Contact a qualified service technician or your retailer. It’s a community-based project which helps to repair anything.

ASUS P4PE2-X Free Driver Download (Official)

Otherwise, conflicts arise between the two P4pee2-x groups making the system unstable and the card inoperable. Follow the hard disk drive documentation when setting the device in master or slave mode.

The CPU fits only in one correct orientation. Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug.

ASUS P4PE2-X Audio Driver

Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Locate the pin ZIF socket on the motherboard.

The minimum recommended wattage is W, or W for a fully configured system. Expansion slots To install and configure an expansion card: P4e2-x note of the specific connector colors as described. The illustration below shows the location of the onboard LED. Information to prevent damage to the components when trying to complete a task.


ASUS P4PE2-X drivers

Move the jumper cap from pins default to pins This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. This Mic pink jack connects a microphone. In 6-channel mode, the function of this jack becomes Front Speaker Out.

No need to use a DOS-based utility or boot from a floppy disk. The functions of the Line Out, Line In, and Microphone jacks change when you select the 6-channel audio configuration as shown in the following table. Install an expansion card following the instructions that came with the chassis. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.

The system may become unstable and may experience difficulty powering up if the power supply is inadequate.

© 2020 All rights reserved